Memory Card Supported: CompactFlash Type I, CompactFlash Type II, Microdrive, Secure Digital (SD) Card, Secure Digital High Capacity (SDHC), miniSD Card, MultiMediaCard (MMC), MMCplus, Reduced Size MultiMediaCard (RS-MMC), MMCmobile, microSD Card, microSD High Capacity (microSDHC), TransFlash, Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Micro (M2)
A contactless smart card uses the same radio-based technology as the proximity card, with the exception of the frequency band used: it uses a higher frequency (13.56 MHz instead of 125 kHz), which allows the transfer of more data, and communication with several cards at the same time. A contactless card does not have to touch the reader or even be taken out of a wallet or purse. Most access control systems only read serial numbers of contactless smart cards and do not utilize the available memory. Card memory may be used for storing biometric data (i.e. fingerprint template) of a user. In such case a biometric reader first reads the template on the card and then compares it to the finger (hand, eye, etc.) presented by the user. In this way biometric data of users does not have to be distributed and stored in the memory of controllers or readers, which simplifies the system and reduces memory requirements.
In the 1-to-many mode a user presents biometric data such as a fingerprint or retina scan and the reader then compares the live scan to all the templates stored in the memory. This method is preferred by most end-users, because it eliminates the need to carry ID cards or use PINs. On the other hand, this method is slower, because the reader may have to perform thousands of comparison operations until it finds the match. An important technical characteristic of a 1-to-many reader is the number of comparisons that can be performed in one second, which is considered the maximum time that users can wait at a door without noticing a delay. Currently most 1-to-many readers are capable of performing 2,000–3,000 matching operations per second.
The outdated, missing or incompatible device driver can also cause other Windows problems, like black screen after Windows update, USB device not recognized issue, hardware device error code 43, etc. In this case, you can use Driver Talent, the safest and fastest way to update drivers to help to download and install the compatible card reader driver or USB driver for Windows 10.