The difference between the two types of smart cards is the manner with which the microprocessor on the card communicates with the outside world. A contact smart card has eight contact points, which must physically touch the contacts on the reader to convey information between them. Since contact cards must be inserted into readers carefully in the proper orientation, the speed and convenience of such a transaction is not acceptable for most access control applications. The use of contact smart cards as physical access control is limited mostly to parking applications when payment data is stored in card memory, and when the speed of transactions is not as important.

Magnetic stripe technology, usually called mag-stripe, is so named because of the stripe of magnetic oxide tape that is laminated on a card. There are three tracks of data on the magnetic stripe. Typically the data on each of the tracks follows a specific encoding standard, but it is possible to encode any format on any track. A mag-stripe card is cheap compared to other card technologies and is easy to program. The magnetic stripe holds more data than a barcode can in the same space. While a mag-stripe is more difficult to generate than a bar code, the technology for reading and encoding data on a mag-stripe is widespread and easy to acquire. Magnetic stripe technology is also susceptible to misreads, card wear, and data corruption. These cards are also susceptible to some forms of skimming where external devices are placed over the reader to intercept the data read. 

There are two types of smart cards: contact and contactless. Both have an embedded microprocessor and memory. The smart card differs from the proximity card in that the microchip in the proximity card has only one function: to provide the reader with the card's identification number. The processor on the smart card has an embedded operating system and can handle multiple applications such as a cash card, a pre-paid membership card, or an access control card.
Biometric templates may be stored in the memory of readers, limiting the number of users by the reader memory size (there are reader models that have been manufactured with a storage capacity of up to 50,000 templates). User templates may also be stored in the memory of the smart card, thereby removing all limits to the number of system users (finger-only identification is not possible with this technology), or a central server PC can act as the template host. For systems where a central server is employed, known as "server-based verification", readers first read the biometric data of the user and then forward it to the main computer for processing. Server-based systems support a large number of users but are dependent on the reliability of the central server, as well as communication lines.
On their website, you will find hundreds of talented psychics that sport a wide variety of specialties to select from. These include psychic mediums, clairvoyants, love experts, empaths, tarot readers, energy heal​ers, and many more. Every advisor within this network have gone through and passed thorough tests to prove their authenticity, which means that you can sit back and relax knowing that your fortunes are in good hands.
*New member offer valid for first time customers who have never made a Psychic Source purchase. Some exclusions apply. Up to 3 minutes of your first paid psychic reading are free. Free minutes have no cash value and are not available to customers who have previously received a free trial of the service. ©2019 Psychic Source. All rights reserved. For entertainment only. 18+
Wiegand card technology is a patented technology using embedded ferromagnetic wires strategically positioned to create a unique pattern that generates the identification number. Like magnetic stripe or barcode technology, this card must be swiped through a reader to be read. Unlike the other technologies, the identification media is embedded in the card and not susceptible to wear. This technology once gained popularity because it is difficult to duplicate, creating a high perception of security. This technology is being replaced by proximity cards, however, because of the limited source of supply, the relatively better tamper resistance of proximity readers, and the convenience of the touch-less functionality in proximity readers.
Our past life psychics can help you open your mind to those experiences in ways you never imagined possible. Through a psychic past life regression we can open a portal to another time and place and allow you to relive those moments vividly. As we journey backwards and forwards we will continue to provide support and guidance so that you can appreciate fully not just the experiences themselves but their deeper meaning, allowing the voices from your past to better mould you future.

A contactless smart card uses the same radio-based technology as the proximity card, with the exception of the frequency band used: it uses a higher frequency (13.56 MHz instead of 125 kHz), which allows the transfer of more data, and communication with several cards at the same time. A contactless card does not have to touch the reader or even be taken out of a wallet or purse. Most access control systems only read serial numbers of contactless smart cards and do not utilize the available memory. Card memory may be used for storing biometric data (i.e. fingerprint template) of a user. In such case a biometric reader first reads the template on the card and then compares it to the finger (hand, eye, etc.) presented by the user. In this way biometric data of users does not have to be distributed and stored in the memory of controllers or readers, which simplifies the system and reduces memory requirements.
Sometimes memories can fade in time, but then we can experience something which brings decade’s old memories flooding back. It could be finding an old photograph, the feel of something in our fingers, the sound of seagulls squawking overhead or the smell from a bakery wafting in the breeze as we are walking along the street. Then, just for a moment, it is as though we are right back in that once-forgotten moment, experiencing the joy and happiness as though reliving it.
A barcode is a series of alternating dark and light stripes that are read by an optical scanner. The organization and width of the lines is determined by the bar code protocol selected. There are many different protocols, such as the prevalent Code 39.[3] Sometimes the digits represented by the dark and light bars are also printed to allow people to read the number without an optical reader.
Recognizing a gifted psychic is actually easier than you might think. First of all, psychics will be able to tell you things about yourself that others do not know. This can range from telling you about events in your life to providing you with information about your personality and beliefs. A gifted psychic will also be able to provide you with information without having to ask you several questions first. A scam artist will try to learn as much about you as possible in order to draw conclusions about you and amaze you with his or her “knowledge.”
If you are looking to speak with a psychic, PsychicCenter makes it easy to connect with an experienced spiritual guide. Plus, we have a special offer to allow new customers to see what our service has to offer at a significantly discounted rate. All new customers can receive their first 10-minute psychic reading from PsychicCenter for the special rate of only $5.
The advantage of using barcode technology is that it is cheap and easy to generate the credential and it can easily be applied to cards or other items. However the same affordability and simplicity makes the technology susceptible to fraud, because fake barcodes can also be created cheaply and easily, for example by photocopying real ones. One attempt to reduce fraud is to print the barcode using carbon-based ink, and then cover the bar code with a dark red overlay. The barcode can then be read with an optical reader tuned to the infrared spectrum, but can not easily be copied by a copy machine. This does not address the ease with which barcode numbers can be generated from a computer using almost any printer.