All biometric readers work similarly, by comparing the template stored in memory to the scan obtained during the process of identification. If there is a high enough degree of probability that the template in the memory is compatible with the live scan (the scan belongs to the authorized person), the ID number of that person is sent to a control panel. The control panel then checks the permission level of the user and determines whether access should be allowed. The communication between the reader and the control panel is usually transmitted using the industry standard Wiegand interface. The only exception is the intelligent biometric reader, which does not require any panels and directly controls all door hardware.
Live video readings are a great way to easily form a connection with your clairvoyant if you are a more face-to-face kind of person. With this method, you can receive predictions, ask questions, and gain insight the same way you would if you were chatting online or over the phone. The main difference is you both are able to actually see one another.
In the 1-to-many mode a user presents biometric data such as a fingerprint or retina scan and the reader then compares the live scan to all the templates stored in the memory. This method is preferred by most end-users, because it eliminates the need to carry ID cards or use PINs. On the other hand, this method is slower, because the reader may have to perform thousands of comparison operations until it finds the match. An important technical characteristic of a 1-to-many reader is the number of comparisons that can be performed in one second, which is considered the maximum time that users can wait at a door without noticing a delay. Currently most 1-to-many readers are capable of performing 2,000–3,000 matching operations per second.
Some people worry that a psychic reading performed on the phone will not be as thorough or accurate as a face-to-face reading. Thankfully, these fears are completely unfounded. Phone psychic readings are every bit as good as an in-person reading, as each advisor is rated anonymously following each call. This guarantees that you are contacting a qualified & professional psychic guide for each call.
Memory Card Supported: CompactFlash Type I, CompactFlash Type II, Microdrive, Secure Digital (SD) Card, Secure Digital High Capacity (SDHC), miniSD Card, MultiMediaCard (MMC), MMCplus, Reduced Size MultiMediaCard (RS-MMC), MMCmobile, microSD Card, microSD High Capacity (microSDHC), TransFlash, Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, Memory Stick Micro (M2)
Magnetic stripe technology, usually called mag-stripe, is so named because of the stripe of magnetic oxide tape that is laminated on a card. There are three tracks of data on the magnetic stripe. Typically the data on each of the tracks follows a specific encoding standard, but it is possible to encode any format on any track. A mag-stripe card is cheap compared to other card technologies and is easy to program. The magnetic stripe holds more data than a barcode can in the same space. While a mag-stripe is more difficult to generate than a bar code, the technology for reading and encoding data on a mag-stripe is widespread and easy to acquire. Magnetic stripe technology is also susceptible to misreads, card wear, and data corruption. These cards are also susceptible to some forms of skimming where external devices are placed over the reader to intercept the data read.
Kasamba is another site where you are able to connect through a real-time chat platform 24/7 or do a reading through an email. With email services, you send out a set of questions for them to look over before you receive a detailed, thorough response shortly afterwards. You can find everything from experts in online mediums, tarot readers, love and relationships, astrologers, fortune telling, clairvoyants, and everything in the middle.
In the 1-to-1 mode a user must first either present an ID card or enter a PIN. The reader then looks up the template of the corresponding user in the database and compares it with the live scan. The 1-to-1 method is considered more secure and is generally faster as the reader needs to perform only one comparison. Most 1-to-1 biometric readers are "dual-technology" readers: they either have a built-in proximity, smart card or keypad reader, or they have an input for connecting an external card reader.
The advantage of using barcode technology is that it is cheap and easy to generate the credential and it can easily be applied to cards or other items. However the same affordability and simplicity makes the technology susceptible to fraud, because fake barcodes can also be created cheaply and easily, for example by photocopying real ones. One attempt to reduce fraud is to print the barcode using carbon-based ink, and then cover the bar code with a dark red overlay. The barcode can then be read with an optical reader tuned to the infrared spectrum, but can not easily be copied by a copy machine. This does not address the ease with which barcode numbers can be generated from a computer using almost any printer.